Steril – GEMINI

OTHER PRODUCTS

• 

  Steril – CTH

  Performances
  Operator Protection
  The containment index, evaluated on the total surface of the front working opening, is equal or less than 5 CFU for not disturbance test or Apf equal or more than 1 x 105 according EN12469.
  Product Protection
  Sterility in the working area higher than ISO Class 5 according to ISO EN 14644 (Class 100/M3.5 according to Federal Standard 209E) @ 0.3 and 0.5 μm particles. Equal or less than 5 CFU per test, according product protection test EN12469 and Equal or less than 2 CFU per test, according cross contamination test EN12469.
  Environmental Protection
  By filtration of the exhaust air through H14 HEPA filter with efficiency 99,995% MPPS as per EN 1822 (EU14 with efficiency 99,999% tested with DOP/DOS @ 0.3 μm). It is suggested, except for particular cases, to duct outside the exhaust air as recommended by DIN 12980.
  Command and Controls
  Air ventilation control by means of automatic regulation of the revolution velocity of the motor blower. Two highresolution flow rate volumetric devices, directly interfaced to microprocessor, achieve the automatic regulation. The microprocessor guarantees the activity of the motor blowers and controls the optimal function even in presence of effects caused by progressive clogging of the HEPA filters. Alarm device optical (red signal light visible from working position and display message) and acoustic (buzzer) type, activated, at real time, by the microprocessor, with indication of type of alarm activate showing on a wide alpha numeric display.
  Monitoring with alarms of the following parameters:
  Exhaust flow rate out of the pre-set range;
  Laminar air flow velocity out of the pre-set range;
  Front window in wrong position;
  Alpha numeric display showing:
  Laminar air flow speed in m/s;
  Exhaust air flow rate in m3/h
  Date and time
  Hours counters for cabinet life
  UV Lamp run hours
  HEPA filters run hours
  Date of last HEPA filters change
  Date of last service
  Date of last power failure
  Change language
  Change password
  Setting UV timer program
  Setting MSC decontamination program

  Download the brochure:
  Cabinets brochure

  Compare
• 

  Steril – TOPFLOW 3 Mobile LAF cabinet for LAB animals cages changing

  Top Flow 3 is a double fan, double side operated vertical laminar airflow cabinet, with partial recirculation. This unit is manufactured like a Class II microbiological safety cabinet with 0.40 m/s mean LAF velocity, front opening inward air velocity more than 0.40 m/s and visual/acoustic alarms in compliance to European standard EN 12469: 2000.
  Top Flow 3 is specifically designed for manipulating and passing of mice or other experimental animals, from dirty cages to clean cages, in a sterile area, with protection for operator, animal and environment. An electrical driven lifting system of the whole cabinet allows the optimum ergonomic worker posture.
  Main and Exhaust HEPA filter: H14, 99.995% efficiency MPPS according to EN 1822 (99,999% DOP test efficiency at 0,3 ?m);
  Main and Exhaust filters HEPA are fitted according to negative seal principle to avoid any escape of contaminated particles and they are testable with DOP for filter integrity).
  Pre-filter (F5) installed below the working surface, to extend filters life and to prevent blockage of motor blower
  Cleanness of air in working area is class ISO 5 @ 0.3 and 0.3 ?m particles according to ISO EN 14644-1 (Class M3.5/100 according to FS209E).
  Exterior structure in carbon-steel (12/10) white coated with epoxy polyester powder RAL 9010
  Work surface and harm-rest in stainless steel AISI 304L scotch brite
  Drain basin under the aspiration part of the work surface, made in stainless steel AISI 304L with rounded edge;
  Protection grid, for main HEPA filter made by anodized aluminium.
  Side windows in 5 mm Safety Glass.
  N° 2 hinged frontal screens, one per side, in 4+4 mm double layer Laminated Safety Glass with anodised aluminium frame with aperture height in working position of 290 mm. Opening angle of 150° to obtain a free aperture section of 1160 x 530 mm (w x h).
  N° 2 soft touch control panel, one in each side in order to work with a cabinet like two independent cabinets (see description below).
  N° 2 front closure in plexiglas.
  Fluorescent lights installed outside the contamination area (2x15Watt) to obtain 400 lux (unbothered for animals).
  Easy maintenance of the motorblower and of the HEPA filters from both front side of cabinet.
  Two lateral handles for movement and positioning.
  External dimension: 1400 x 840 x 1980 mm (wxdxh).
  Working chamber dimension: 1160 x 700 x 674 mm (wxdxh).
  Base supplied with stainless steel wheels and brakes (125 mm diameter) and electrical adjustable device for regulation of work surface height from 800 mm to 1100 mm; Level of work surface is 100 mm under level of harm-rest.

  Download the brochure:
  Cabinets brochure

  Compare